Tungsten carbide wire drawing dies
Carbide wire drawing dies are used in both drawing and extrusion machine, The work piece is forced under pressure through the die. Our drawing dies are suitable for different kinds of material, such as mild steel, high carbon steel, stainless steel, brass, aluminum etc. Our drawing dies can ensure high surface roughness under high-speed drawing
1. Our advantage
1 100% raw material
2 HIP Furnace Sintered
3 High precision grinding
4 Bore size up to 0.1mm
5 Produce finished dies with steel case
6 Fast delivery
7 Professional manufacturer of tungsten carbide products with 20 years experience.
8 Complete Quality Control System and strict inspection.
2. Our Mould size
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R
3. Grade recommendation
| Grade | Density(g/cm3) | Hardness(HRA) | TRS(MPa) | Applications recommended |
| YG6X | 14.95 | 91.5 | 1800 | For drawing steel and nonferrous wires or bars of less than diameter 6.00mm under not so much stress. |
| YG6 | 14.95 | 90.5 | 1900 | For drawing steel, nonferrous alloy bars of less than diameter 20.00mm under more stress and also for drawing tubes of less than diameter 10.00mm. |
| YG8 | 14.8 | 89.5 | 2200 | For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts. |
| YG10 | 14.5 | 88.5 | 2400 | |
| YG15 | 14.0 | 87.0 | 2800 | For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting |
Products Show:
